Vivolink 18G HDMI 5 Volt EDID Manager

Help compatible displays wake when HDMI video starts and enter standby when it stops. The VLHDMICTL3 detects video activity using LVDS signal detection and controls HDMI output 5 V accordingly.
Some HDMI sources continue supplying 5 V after video stops, preventing certain displays from entering standby. Installed between the source and display, the VLHDMICTL3 helps resolve this issue and supports automatic wake-up when video returns.
Suitable for laptops and video conferencing systems connected to meeting room TVs or interactive displays.
Key features
One HDMI input and one HDMI output.
Supports 4K60, 4:4:4 and up to 18 Gbit/s.
EDID settings: PASS, 1080P and 4K30.
HDCP settings: Y enables HDCP; N follows the display.
Compact enclosure: 60 × 48.5 × 11.5 mm.
USB-C input for external DC 5 V power when required.
EDID presets define the video format requested from the source. Protected content playback depends on the connected equipment’s HDCP support.
Installation requirements
Automatic wake-up and standby require a compatible display with the relevant settings enabled. The trigger is video activity: a video bar displaying a home screen or screensaver still sends video and may prevent standby. Standby does not disconnect mains power.
External USB-C power is required if the HDMI source cannot supply 300 mA. A 0.5 m USB-A to USB-C power cable is included; a DC 5 V power supply is not included.